Friday, 4 May 2012

1000 Words Paints A Picture

This small post is going to be commenting on the text that I have used with my animation.

I decided to add to my original idea and make the animation more humorous by adding in a couple words of text, for example the crossbow and the catauplt are having a battle and I inserted the text 'Champion' for the crossbow and the words 'Contender' for the catapult.

The text was simple to create, just typed what I wanted into 3D's Max, placed the text where I wanted it to show by rotating and moving the text into position. I also had to extrude the text to make it 3D, but I do think that by using the text it fits within the animation and seems to be funny. Below is a screenshot of an example of the text that I have used within my animation.


This screenshot is of the text that I have used in my animation you have to watch the whole animation to understand

And Were Rolling!

This post is going to comment on the camera that was used within the animation.

For the animation I was going to use multiple camera's however I realised I would need to do multiple camera's and didn't feel I had the time to fit them in the animation. However once I had come to the end of animating I realised I could have done my original plan as I needed to do multiple renders anyway, but this will be explained in the render post which is to follow.

However back to camera's for my animation, I used a target camera, as I felt using a free one wouldn't capture what I really wanted, with a target camera I could position exactly what I wanted the audience to see, and I think I have achieved this quite well. I will screenshot a camera view from the animation.


This screenshot is of a camera view from my animation, I zoomed out at this point so that you could see the catpult fall apart

It's Model Time

This post is going to be commenting on the three models that I created and what they are doing within the animation that I have created.

Firstly I will comment on the Giant Crossbow Model. For this model I followed the storyboard that I had created and wanted to show off the destructive power of the crossbow. This was achieved by having the crossbow take a shot and destroy the catapult model, there was not a lot of animation that needed to be done to the crossbow however the animation that needed to be done was still very fiddly. However I am still pleased with how the crossbow animation has turned out.

The animation that I used on the crossbow was to make the arrow fire from the crossbow. I could have just made the arrow fire, but I thought that was too easy and very boring, so I decided to animate the turning wheel and the rope that are attached to the crossbow (this was the fiddly part). I kept moving the turning wheel in a rotation motion so that it looked realistic, also I timed it so that the rope moved forward, with finally the arrow shooting off from the crossbow once the roped had moved forward enough. I will screenshot what I have animated on the crossbow so that it makes more sense.



This screenshot shows the crossbow, you can see the turning wheel and the rope which I have animated to move



Next is the catapult, this model was the most tricky to animate as it has a few moving parts and if I had just left them without any movement, the animation would have been very boring and not very entertaining. Even though the catapult was the most difficult to animate I am still very pleased with how it turned out.


The animation that was needed for the catapult was, the catapult needed to fire at the crossbow and cause some damage. So I needed to animate the handle, the turning wheel, the arm and the ball all in one single movement. With the ball then causing damage on the tower.


The handle, arm, turning wheel and ball all needed to be rotated at the same time on the timeline so that it seemed realistic, and I think it does. Again I will screenshot the catapult so that it is clearer to understand.



This screenshot is of the catapult which you can see the arm has moved from top to bottom, the turning wheel, the handle have been animated to move also

The last model to comment on is the tower, this model was not really animated in anyway. I only had to 'Pro Boolean' out the catapult's ball so that it looked like the ball caused some damage to the tower.


This however did start to become an annoying problem as I found out that when something is 'Pro Booleaned' in an animation, the geometry starts to go wrong further down the animation, which became very annoying. Once I 'Pro Booleaned' out the ball I found it disappeared from the rest of the animation so I needed to clone the ball and time it within the animation with the 'Pro Boolean' which took a very long time.


Furthermore when I started to move the cloned ball into a better position it ended going in the wrong position when the animation was played, however I eventually fixed it and am happy with how it has turned out. Again I will screenshot the tower for better understanding.



This screenshot is of the tower as you can see there is a hole in the tower which is the 'Pro Boolean'

All Coming Together

For this post I am going to comment on the rendering that I have had to do within the animation.

Firstly I had finished my first attempt at an animation and was ready to render, I selected all the options that were needed apart from the compression, as the video needed to be uncompressed which I didn't do and found out once I had rendered the animation.

So I had to re-render and remebered to slect uncompressed this time. Luckily my animation didn't take long to render, unlike my colleges where there's took five hours to render!!!

Eventually the second render attempt finished but once I played it through the geometry went all wrong, and I assumed this was because of the 'Pro Boolean' so I went for a third attempt but did the render in chunks which eventually worked after the third attempt.

Next I had to import the files that I had render into Adobe Premier so that I could join them together which wasn't too difficult seeing as I hadn't used it before.

Furthermore whilst in Premier I added a static title at the end and the beginning of the animation just to tell the audience who's animation it was.

But I think I have eventually got there and am almost ready to hand in getting a little nervous now!

Wednesday, 2 May 2012

Taking In The Scenery

This post is regarding the scenario that the animation I am creating is going to be in. I was given a brief to work from, which was firstly to create three models based around 15th Century Italy and Leonardo Da Vinci and to create an animation to fit this brief too.

The three models where of Leonardo Da Vinci's inventions the only problem was to think of a scenario that matched the brief, and I decided to go with an animation that showed of the power of these inventions, which gave me the idea of a scenario being away from any city's of Italy, instead being part of a 15th century battlefield.

However I must admit that the scenario is not greatly detailed and I feel that this lets the animation down, furthermore this might have been due to me paying more attention to the animation of the models and not the surrounding area of the models.

I decided to create a cylinder for the environment floor, this was because when you look at the horizon the world is round, and if I had just used a pre-fixed plane within 3D's Max then the horizon would have been flat not round hence the use of a cylinder, then I just added a sandy texture with a bit of bump added. The reference for this texture is:

Sand Terrain Texture - n.d. Sand Texture, [electronic image] Available at: <http://www.google.co.uk/imgres?q=sand+texture&hl=en&sa=X&gbv=2&biw=1184&bih=666&tbs=isz:l&tbm=isch&tbnid=018t48LRViNrTM:&imgrefurl=http://www.imageafter.com/image.php%3Fimage%3Db1dirt005.jpg%26size%3Dfull%26download%3Dno&docid=ZWFZYoad6VJSzM&imgurl=http://www.imageafter.com/dbase/textures/grounds/b1dirt005.jpg&w=1600&h=1200&ei=3UeRT-SCLeKV0QXsr9nVAQ&zoom=1&iact=hc&vpx=882&vpy=252&dur=2571&hovh=194&hovw=259&tx=63&ty=101&sig=117830732039765713861&page=1&tbnh=118&tbnw=155&start=0&ndsp=18&ved=1t:429,r:11,s:0,i:131> [Accessed 12 April 2012].

The other texture that I have added for the scenario is the sky. I decided to add this because if I had just left it blank the animation would have been boring and not realistic however by adding in the sky texture I believe it has made the animation more realistic. The reference for this texture is:


Blue Sky Texture - 14 August 2008, BLUE SKY, [electronic image] Available at: <http://thedangerousofficial.blogspot.co.uk/2008/08/blue-sky.html> [Accessed 20 April 2012].

Tuesday, 24 April 2012

Animation So Far

The animation has started and is coming together quite nicely,


So far I have imported all the models and I was told from other peers that there might be a problem with the textures but everything was fine for me. 


I created the terrain for the animation where the crossbow and catapult will do battle, this was done by creating a simple cylinder and increasing the scale of the model so that it stretched out to cover a wide area. I choose to do the terrain this way because the world is round and hence what thee cylinder will do, I could have used a plane but the world is not flat and that it was you would have seen on the horizon.


The terrain texture reference is as follows,


Sand Terrain Texture - n.d. Sand Texture, [electronic image] Available at: http://www.google.co.uk/imgres?q=sand+texture&hl=en&sa=X&gbv=2&biw=1184&bih=666&tbs=isz:l&tbm=isch&tbnid=018t48LRViNrTM:&imgrefurl=http://www.imageafter.com/image.php%3Fimage%3Db1dirt005.jpg%26size%3Dfull%26download%3Dno&docid=ZWFZYoad6VJSzM&imgurl=http://www.imageafter.com/dbase/textures/grounds/b1dirt005.jpg&w=1600&h=1200&ei=3UeRT-SCLeKV0QXsr9nVAQ&zoom=1&iact=hc&vpx=882&vpy=252&dur=2571&hovh=194&hovw=259&tx=63&ty=101&sig=117830732039765713861&page=1&tbnh=118&tbnw=155&start=0&ndsp=18&ved=1t:429,r:11,s:0,i:131 [Accessed 12 April 2012].


I have placed all the models in place for the animation so that I can just add the cameras and not need to move any of the models from their original position.


I also had to enlarge the models because the terrain was so large the models needed to compensate also otherwise they would have been tiny specs and would not have looked very good.


I just now need to add some more camera's and the text that is going to flying across the animation


Now lets keep going.

The Walking Model

For this tutorial I looked at a real-world preset action which is making a model walk!!!


For this I needed the simple character model that I had previously created and a preset model with 3D's Max called a Biped.


Firstly I needed to have the character open and I needed to bind the Biped model to the character model. This meant I had to line up the Biped model to the character model I created, for example I needed to add extra neck links and spine links. This was to make the character model move and seem more lifelike. I could have just used the preset Biped model but that is boring.


To begin the first step was very tricky, however it started to slowly come together but I had to basically 'snap' parts of the character model onto the Biped model, this was for the character model to have an exo-skeleton so that it could complete the next process.


Once That process was complete I was able to add footsteps and make my model really come to life by making it walk! This was done by using the 'Create Multiple Footsteps' action and all I needed to do from there was to choose how many footsteps I wanted and they were placed for me. I could have added extra actions such as how far part each step was but this was just practice.


From there on it was a case of pressing play and watching the character that I had created come to life and walk


Have I created a MONSTER???



This is the screenshot of the character I have created. As you can see I have added footsteps however some parts of the character are not quite 'snapped' correctly on the Biped and was a problem I could not fix and finish